NuMicro ISP Programming Tool for KOOPOR mini2(Not for KOOPOR Primus)



1. You have to hold the fire button all the time during the upgrading


1. Factory Micro USB cable (with data transfer function).

3. OS System requirement:Windows XP/7/8/10. (FYI: There is no driver to match Apple Mac OS from the PCB chip vendor.)



KOOPOR mini2V1.0.7

Guideline for upgrading the KOOPOR mini 2 to V1.0.7

1.Open the Koopor mini2 upgrading Tool folder with the programming tool and hex file,open the NuMicro ISP tool

 in the arrow

2.hold the firing button,connect the Koopor mini2  to the computer(you have to hold

the fire button during the upgrading) the “Connect” icon till the “disconnect ” icon come with light

    4.Click APROM icon

    5.find the hex file in the folder and open it

    6.Mark APROM file icon and Config Icon in the arrow,and unmark the other icons,then click "Start"

Please mention   that you will get a PASS if you have successfully upgraded your Koopor mini2

This product is intended to be used with e-liquid products containing nicotine. Nicotine is an addictive chemical.
Important Safety Information and Warnings
You have to make sure that your age is 21 or older, then you can browse this website further. Otherwise, please leave and close this page immediately!