NuMicro ISP Programming Tool for Guardian III(Not for Guardian II)

UPGRADE TOOL FOR YOUR GUDRDIAN III


GUARDIAN III V1.0.5

Improved the “short” problem during the vaping

NOTICE

1. You have to turn off the device and take out the battery before upgrading

2. You have to hold the fire button all the time during the upgrading

PREPARE

1. Factory Micro USB cable (with data transfer function).

3. OS System requirement: Windows XP/7/8/10. (FYI: There is no driver to match Apple Mac OS from the PCB chip vendor.)


DOWNLOAD LINK

Guardian III upgrade tool (V1.0.5) (Zip)


Guideline

      1.    Open the Guardian III upgrading Tool folder with the programming tool and BIN file, and then

      open the ISP tool in the arrow.


      2.    Hold the firing buttonconnect the Guardian III to the computer(you have to hold

the fire button during the upgrading).


3.    Click the “Connect” icon till the “disconnect ” icon come with light


    4.    Click APROM icon


    5.  Find the BIN file in the arrow of the folder and open it.

    6.  Please mind that the Config data should be 00013000. Redownload the ISP tool if you can’t adjust it


     7.  Mark “APROM” file icon, then click "Start"


   8.  Please mind that you will get a PASS if you have successfully upgraded your Guardian III.

WARNING
You have to make sure that your age is 18 or older, then you can browse this website further. Otherwise, please leave and close this page immediately !