NuMicro ISP Programming Tool for X-Cube Ultra(Not for X-Cube II/X-Cube mini)

UPGRADE TOOL FOR YOUR XCUBE ULTRA

XCUBE ULTRA V1.1.3

Improved the vaping delaying

NOTICE

1. You have to turn off the device and take out the battery before upgrading

2. You have to hold the fire button all the time during the upgrading

PREPARE

1. Factory Micro USB cable (with data transfer function).

3. OS System requirement: Windows XP/7/8/10. (FYI: There is no driver to match Apple Mac OS from the PCB chip vendor.)

 

DOWNLOAD LINK

 XCube Ultra upgrade tool(v1.1.3) (zip)

Guideline

1.    Open the XCube Ultra upgrading Tool folder with the programming tool and BIN file, and then

open the ISP tool in the arrow.


2.    Hold the firing buttonconnect the XCube Ultra to the computer (you have to hold

the fire button during the upgrading)


3.  Click the “Connect” icon till the “disconnect ” icon come with light


4.   Click APROM icon


5.   Find the BIN file in the arrow of the folder and open it


6.    Please mind that the Config data should be 00013000. Redownload the ISP tool if you can’t adjust it.


7.   Mark “APROM” file icon and “Config” icons, then click "Start"


8.   Please mention that you will get a PASS if you have successfully upgraded your XCube Ultra.


WARNING
This product is intended to be used with e-liquid products containing nicotine. Nicotine is an addictive chemical.
Important Safety Information and Warnings
You have to make sure that your age is 21 or older, then you can browse this website further. Otherwise, please leave and close this page immediately!