WARNING
You have to make sure that your age is 18 or older, then you can browse this website further.
Otherwise, please leave and close this page immediately!
I AM OLDER THAN 18! LEAVE AND CLOSE!

MICRO ONE 150 KIT

Micro One 150 Kit, made of R150 mod and Minos tank, realizes comprehensively upgrading on the base of Micro One. You will love it at the first sight. Its compact size is pocket friendly and portable; three selective shell colors with paint finish show your style. R150 Mod is build-in battery type mod which the capacity is 1900mAh and the max output power can up to 150W.Minos is one special sub-ohm tank which could change to RTA easily just with the super large deck M2. The cost effective and affordable, upgrading experience of Micro One 150 Kit lets you enjoy vaping anytime and anywhere.

SPECIFICATIONS

OUTSTANDING PERFORMANCE &COLORFUL FINISH OPTIONS

Rubberized Finish in 4 Eye Catching Colors, there is always one for you. In addition to its portable and compact size, R150 TC has a fundamentally improvement in finish. The new rubberized finish adds a shiny look and soft feel, and is more durable than an oxidized one. What's more, it provides 4 eye catching colors for you to choose.

COMPACT SIZE

R150 Compared With R80

Built-in Battery

R150 TC uses built-in battery with 1900mAh battery capacity. 2x22500 batteries in series, so the capacity is still 1900mAh, but the endurance ability is same as 3800mAh. Learn More Details. You can charge it by the Micro-USB port. Multiple protections like low or high battery warning, short-circuit protection, over-heating protection, etc. You can enjoy safer experience.

STRUCTURAL DESIGN

R150 TC is designed with style and function to provide you a more comfortable and ergonomic

ADJUSTABLE INITIAL RESISTANCE

As temperature sensing coils tend to be sub-ohm, the poor contact problem can make a big error, in a way that is not evident when an atomizer is being used for wattage control only. This function is designed to ensure your resistance on the load remains the same. And its adjustable range is ±50 mΩ (± 0.05Ω).

SS/NI200/TI WIRE SUPPORT

R150 TC can support temperature control with Stainless Steel wire as well as Nickel 200 & Titanium, and allow you to adjust their TCR (Temperature Coefficient of Resistance) in different ranges for further improving the accuracy of temperature control and bring you the best taste.

MULTIPLE PROTECTIONS

R80 TC provides multiple types of protections to safe guard against potential risk.

BOTTOM AIRFLOW SYSTEM

There are two adjustable air slots evenly spaced on the bottom, airflow can be adjusted freely, which allows you to have an extremely open draw.

DECK & CORE

510 RDA DRIP TIP FOR TOTALLY NEW EXPERIENCE

The 510 RDA drip tip with the V shape airflow channel will definitely create a totally different vaping experience that most people shall like. And its cone-like body looks pretty cool!

TOP REFILL SYSTEM,FILLING IN ONE GO

Minos uses top refill system with hinge lock, you just need to swivel its top cap, and then fill easily. And the leak proof e-liquid slot can significantly solve leaking problem

HOW TO BUILD THE RTA (M2)

Before starting make sure your hands are clean.

Taking the Minos-RTA M2 deck apart.

Installing the pre-wrapped coil.

Insert one end of your coil into the up-side screw, and the other end into the down-side screw.

Positioning and cutting the exceeding ends of wire off

Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.

Cutting a strip of cotton and make sure it's just larger than the coil you built.

Inserting the cotton, and placing it in the middle.

Cutting the wick at an angle and make sure it's not too short and not too long.

Wet the coil with your e-liquid and adjust the wick.

Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.