WARNING
You have to make sure that your age is 18 or older, then you can browse this website further.
Otherwise, please leave and close this page immediately!
I AM OLDER THAN 18! LEAVE AND CLOSE!
X Pro Plus (M80) box mod firmware upgrade guide

X Pro Plus (M80) box mod firmware upgrade guide

Dear SMOK X Pro Plus(M80)users, thanks for your support to SMOK always. We'd like to show you how to update your X Pro Plus box mod firmware to the latest version.


Prepare


1. Check Current Version: press the reset button, then turn your X Pro Plus(M80) box mod on, and the screen will show your current firmware version.


2. DATA USB cable.


3. Download the right upgrade firmware version: 

1) X Pro Plus(M80) box mod with original firmware version V0004, can only be fully compatible with V0005-1 version (For those had been upgraded to V0005, please refresh it to V0005-1).

2) X Pro Plus(M80) box mod with original firmware version V0006, can be upgraded to V0006-1 version.

3) OS System requirement: Windows XP/7/8, using the Upgrade Tool.


Upgrade


  1. Offical video guide: check out here


2. Video made by The Vapor Chronicles: (Thanks for The Vapor Chronicles!)


Download


1. Upgrade Tool


2. Firmware version V0006-1 for X Pro Plus with original firmware version V0006. Improved functions: Short-circuit protection message has changed from "CHECK ATOMIZER" to "SHORTED", and others remain the same.


3. Firmware version V0005-1 for X Pro Plus with original firmware version V0004 (or who already upgrade version V0005). Improved functions: Short-circuit protection message has changed from "CHECK ATOMIZER" to "SHORTED", and others remain the same.


Notice


When you use the incorrect firmware version to upgrade, the "+" button will not work, in that case, please use the correct one to refresh.