WARNING
You have to make sure that your age is 18 or older, then you can browse this website further.
Otherwise, please leave and close this page immediately!
I AM OLDER THAN 18! LEAVE AND CLOSE!

CLOUD BEAST KING

The beast tank’s King as arrived to take over the pride! With a stout 27mm diameter the Cloud Beast King accommodates the largest and most advanced coil heads in the industry to date. The Cloud Beast King roars with the following coil options: the V12-T12 (Twelve coils), the V12-X4 (Quadruple coils, side by side), and the V12-Q4 (Quadruple coils stacked). With so many options there is no doubt that this truly is the KING of BEASTS and the latest game changer in the industry for 2017!

9 COLOR OPTIONS AVAILABLE

GLASS TUBE - More Options

SPECIFICATIONS

COMPONENTS

STAINLESS STEEL AND GLASS CONSTRUCTION

BUILT TO LAST

The TFV12 is the pinnacle of the TFV series of tanks. Every aspect of the TFV12 contributes to it being the King of performance and the last word in current electronic cigarette tank technology. The King of Beast’s large size prebuilt atomizers, specifically the V12-T12, the V12-X4, and the V12-Q4 coil heads improve the efficiency of atomization beyond measure and are also able to handle high output power with ease. The most powerful coil heads for the King of Beasts, would you expect anything less?

V12 ENGINE

POWER AND PERFORMANCE

LARGE CAPACITY

KING’S BROAD-MINDED

TFV12 features with large size and 6ml e-juice capacity, which can satisfy several times vaping. TFV12 is just like the true king that is capable with anything.

TFV12 VS TFV8

THE BEAUTY OF EVOLUTION

The evolution of the TFV series has always brought you a bigger better Beast with each release. The TFV12 is no different. The TFV12 has had it’s diameter increased by 2.5mm, it’s airflow inlets have been increased by 30%, a larger inner diameter Delrin drip tip, all of which increase the TFV12’s performance. You will love the King of Beast’s roar!

GLASS DRIP TIPS

( OPTIONAL)

Resin Drip Tip

( OPTIONAL)

V12-RBA-T supports single coil build

TOP REFILL SYSTEM

Top rotary refill design makes filling as easy as it gets. Leak proof e-liquid slot can significantly solve leaking problem.

SINGLE COIL BUILD SUPPORT

The King of Beasts allows for single coil builds when used with the silicone plug.

V12-RBA-T supports single coil build

BUILDING THE RBA

8 Simple and Easy Steps

Be sure your hands are clean.

Disassemble the RBA.

Place the coil’s leads between the posts and wrap them around the RBA’s posts. Once in place ensure the coil is aligned with the air flow. Make sure that the coil is NOT touching the base.

Seat the coils into their final position, secure them by tightening the screws, and finally cut the excess leads off.

Cut a strip of cotton for your wick. Not too big and also not too small.

Thread your cotton through the middle of your coil.

Cut the ends of your cotton wick at an angle and stuff them throughout the juice well.

ATTENTION: Check the resistance of your coils before firing them on any device and check them periodically to ensure that the resistance remains the same.

BUILDING THE RBA-T

Be sure your hands are clean.

Disassemble the RBA.

Place the coil’s leads between the posts and wrap them around the RBA’s posts. Once in place ensure the coil is aligned with the airflow. Make sure that the coil is NOT touching the base.

Seat the coils into their final position, secure them by tightening the screws, and finally cut the excess leads off.

Cut a strip of cotton for your wick. Not too big and also not too small.

Thread your cotton through the middle of your coil.

Cut the ends of your cotton wick at an angle and stuff them throughout the juice well.

ATTENTION: Check the resistance of your coils before firing them on any device and check them periodically to ensure that the resistance remains the same.

GIFT IS COMING

If you book the pre-sold kit on the official website, you can get a T-shirt printing“SMOK V12”as a gift, only 100 pieces are waiting for you.